I just got my Storm 2 this afternoon (I had a Storm 1 for 1-1/2 years). After I restored my files from Desktop Manager I went to Application Loader to see what I wanted to take off or put on. I removed all the foreign language stuff and added a few items. When I clicked next I got an error message saying there was not enough memory in my device. This is crazy since I have 117 MB of free application memory. I am using Desktop Manager v. 4.7 that worked fine for my Storm 1. Do I have to use v5 for the Storm 2, or is it some other problem.
Now I've never had this problem on my Curve, but i recently bought a Storm 2 and the phone does not detect the 16Mb memory card. I have tested several other memory cards and still nothing. I have used my Curve to format the card and it worked fine for the Curve but still didn't work in the storm. Any suggestions or fixes for this problem?
i am just a new user of the storm 2 9520. since i noticed on Internet most users have around 137 mb free application memory and i only have 122.3mb. so i installed berrymeter. seems i only have 128mb in total of application memory. i am running on .530 hybrid
You've probably all been asked this loads and I've read some forums posts and tried software but ive not been able to find a solution or answer.Basically Ive just got myself a Storm2 and was told by my provider that I could sync my emails from outlook to my device and back like a windows mobile device. As ive found out this isnt the case, I really like the phone and dont want to hand it back over to swap for another device but if I dont find a solution then I wont have a choice.My question is, is there any software available that will sync my device to my computer the same as a WM device does through activesync?I have tried Astrasync and Notifysync both which throw errors up and dont work
I have a question about the memory that BB's have. What is the point of having SD cards if we cannot use them for the applications? Storm 2 users have 16bgs of memory device and SD card combine, but we can only use about 100mb for apps. We only have 256mb of application memory. why? The OS takes half of that, with the memory leaks that we have an a couple of appls our phones start acting retarded and slow.
Why cant we have the application memory just for the OS and the rest of the memory for apps and out stuff. What is the point of having all this memory available if the phone is going to slow down because our memory is going low. Is it always going to be like this? the new bb's are going to be coming out with 512mb of application memory and i still think we are going to have the same issue.
I dunno about that pic, if it is running OS 6.0 it doesn't look like the OS is taking up that much memory. I don't see why a device with 256 couldn't run it. Yea it wouldn't boot up with 130 like it is now, but still. 256 should be enough.
If i keep my emails "forever" in the setting, do those emails take up application memory? Meaning, over the next few months to more emails i have on my phone to less application memory i should have over time?
What the heck do you use it for? I know what it can be used for, but what do you use it for? So far mine is empty, and I haven't run across anything to use it for yet. Just wondering if there is something obvious that I am missing that people are using it for.
I am trying to use my Storm 2 as a Wifi only device as I have switched to another phone. I have set up the Wifi connection to my router and disabled the mobile network. The problem is that only some applications are able to connect to the Internet successfully. I am able to send message through Blackberry Messenger and Pandora streams music but I cannot receive e-mails, load anything in the web browser or use the Facebook app. I am getting an error stating that the device could not connect to the Internet. Does annyone know what might be causing this and how to fix it?
I'm a new user here, also a newbie to BB, I really love that something like this site exist, and I was reading thru the forums and I can see alot of expertise and experience in posts, I hope that someone will help me with my issue.
I've got a BB Storm2 9550 from Verizon, that was working fine until I accidentally dropped it and it cracked the whole screen, but the device was working NP. I decided that I will buy a new replacement part display and replace the damaged one with the new one. So I do have a new display and I take apart my damaged 9550 removed the display and replaced for the one I ordered, It turns out its a display from 9920 not 9550, the phone symbols looks a bit different, both red and green are sharped on ends and facing down and the BB logo and the back button on the new display is smaller. That would not do anything else then a slight change in the look that i absolutely dont mid at all....
Title explains it all after mulitple battry pulls my lock button only locks the device untill I hit the unlock button. The screen to enter the password doesn't show up. it just says " screen is locked press power button to unlock". I need my device to have a password.
I always thought that the code files when you do a backup are pin specific and you can only use them on one device at a time. But the other day I transferred a premium theme. I paid for to my roomates s2 from one of my backup folders and it works perfectly fine. Does this mean that we could just share any app between storms as long as they don't ask for a reg code? Or was this just a fluke and it shouldn't have worked?
Got an unlocked 9550 (VW) activated but I am not getting emails (have BIS plan). I went to tmobile to change the device (PIN and IMEI) but tmobile says "The information you have provided is not valid for this provider."Also, I can't update the host routing table. It's blank and registering doesn't do anything. APN is set to epc.tmobile.com.
i have a blackberry storm 2, and i need to fully wipe it, i tried with bbsak but i does'nt solve my problemm i'm having multiclick issues since i updated to .517, and when i wipe with bbsak it seems that it just remove some cods from the os so that it gives the 507 error. i need another option tu FULLY wipe my phone.
I'm considering getting the Incredible (terrible name) when it comes out but I really don't want to pay the $600 retail. What are my options to lower the cost? How much can I sell my S2 for assuming I make an insurance claim on my current cracked one and receive a nice new one? Is there any way VZW will let me upgrade?
Like many have done, I've got a replacement S2 on its way to me and have to consider how to treat it when it get here.Are there any known memory resource issues or corrupt files issues when using Device Switch Wizard within Desktop Mgr? I could certainly build it up from scratch, but the Switcher could make life easier, if it doesn't bring its own unique set of problems with its use.Any insights from those who have used both methods on the same model device?
I've been a Blackberry user since November '09 and have a Storm 2.I am very aggravated and at my wit'send.I read all the threads about moving pics from your device to your media card, but nothing is working.I moved them all individually.What I am attempting to do:When I take a pic with my camera, I'd like it to save automatically to my memory card.
So I was updating via Desktop Manager on a mac. Mid upgrade I got a message on the computer- "software upgrade failed"
On the blackberry I got a message I've never seen before-"Reload Software 507" and it has a weird icon with a circle and line through it.
I'm afraid to do anything! What do i do, HELP!!! Edit: Now it keeps shutting off, rebooting itself, and then the same error message appears. Meanwhile, the mac is still trying to update the storm2. Its a vicious circle of death!
I bought DynoStorm and installed it on my Storm2 (9550) running OS v126.96.36.1993. The app installed and all the permissions are set to "allow" except for "security timer reset" which is set to "deny" and locked out by our company's security policies (BES).The app launches but when I go to make changes to the settings, I get:
Fatal error saving log data : net.rim.device.api.io.file.FileIOException: Media Card is secured by another device. Unable to access encrypted file. <OK>
Due to our company policies, my device memory is encrypted though my media card is not. I also tried inserting a different 16GB MicroSD card and having the OS format the card. I still get the same error.
So I upgraded to .607 today via OTA and when I try to change my ringtone it says invalid ringtone make another selection. The crazy thing is it does it even when I select a ringtone that came on the device. It does it with all of them. Even when I hit try at the bottom it says the same thing and when I get a call it rings the generic old style ring. Has anybody had this issue or anyone know how to fix it?