Sony Ericsson :: SE W580 Flashed / Where To Put Custom Pack?
Mar 29, 2010
I flashed it and got an error saying to contact att on the screen after i cant figure out how to put the custum pack into the phone using jdflasher. can anyone help me? i got my info from this site here http://www.modmy-forum.com/index.php?topic=2587.0 however when it gets to the part of ading the custum pack.
As title, IF i flash my c901 with C901_R1GA028_FS_APAC-ANZ_RED53 and C901_R1GA028_MAIN_APAC_FI_RED53, will I get Chinese in my phone? What if I use C901_R1GA028_MAIN_GENERIC_FI_RED53? What is the different? Who can help me with this? and where can I find custom pack for C901?
I've been having problems connecting my W580i to my computer via usb cable (it is an original sony Ericsson cable). It used to work fine, but now my computer gives me a "Device has malfunctioned. Please reconnect or replace the device".I have all the proper drivers installed for it but it still doesn't make a difference. I also tried using 3 other cables, and 4 different computers, but it still doesn't work. I think it's a problem with the fast port, and i tried cleaning it with ispropyl alcohol and cotton but it still doesn't work. I even tried using a needle to get some of the residue off the fast port and it still doesn't work.
How can we add new languages to our "ViVaZ PrO"?My friend has a Vivaz Pro with "Persian Language" already installed on it. But my phone doesn't have it.Is there any language pack or update to download?
this is the best gfx pack for k850 i have ever seen.here a picture: here is the video created by me: http://www.Internet.com/watch?v=jx-7txc5wlu and here download link: http://topse.ru/index.php?do=files&op=showfile&lid=9754[ this message was edited by: tarete on 2010-01-30 01:30
Anyone got some really cool IC packs or themes for their C905? I am currently using Trojan's IC pack and Windows 7 theme, which is very nice, but was wondering what else is out there which works well on the C905 specifically.
When i bought my phone second-hand it had the wrong firmware on it. The previous owner flashed it back to R1CA037 in order to install HelloOX2 (which is a hack, I'm aware of it). Unfortunatly, the phone is now in english which it wasn't in its original state. Now I'm asking you if it is possible to somehow restore the original, swedish patch. I'm running with the recent update, R2AK006.
Pretty new to the forums and in need of some assistance. Recently and successfully flashed+debranded SE w705a. Made sure to backup contacts and restore them, no problems there. Backed up sms also by using the move to mem card option as well. As I moved them there I assume they are alright. Tje problem is however with the new FS and whatnot that came with the flashing, when I try to move them back onto the phone, they are not detected on the memory card. When I moved them to the mem card the phone gave some message in regards to losing them if you update software or something to that effect. I tried SE suite to see if I could grab them off the memory card but to no avail. Is there another program or something that I can use to transfer the sms back onto the phone?When I flashed I used the guide here: http://www.howardforums.com/showthread.php?t=1221924 -- using FS for Hong Kong also.
Just buy a new Sony Ericsson Vivaz Pro U8a phone. But, there are only English and French Language. How can I get the both Traditional and Simply Chinese language code for my mp3 music and novels?
So i recently purchased the W518a from At&t, and was wondering if it was possible to replace the startup video with a custom one. Is there a filesystem editor that I can use to do this as well?
I'm trying to download a new software update for my W760a, because it tells me it cannot add anymore contacts and I can't recieve or send texts/ phone calls. When I try to go to the software updates on the W760a hompepage, it loads a blank page. It just says on the tab "Sony Ericsson Support Phones Topic Updateserviceapplication W760a", and loads a blank page. Please help me with this problem as I wish to continue using my new phone.
I thought I may start an Elm/Hazel thread for discussion as it seems many of you have one of the two phones now. I wanted to do this to discuss any problems with things like firmware & issues & other stuff rather than discussing this in the picture thread. Esato Awards King of Garbage 2009/2010 & Best Debater 2009 x10 & Nokia N8
I think the fone fell, cause it was dusty or maybe its because it was charged using the USB cable. What can be the possible cause of the phone not to turn ON?
As the title implies, I need to ask if there are varying kinds of Sony Ericsson LCD screens for the G705 or if there are variations in models made. Nearly 6 months ago I bought a Sony Ericsson G705 phone off eBay that only needed a new LCD screen. Well I purchased a screen off eBaand was good to go except for a few minor issues... 1.) The LCD screen had a thicker screen/border than the original so I had to mod it by taking off the white border around it. 2.) The ribbon that connects the LCD screen to the G705's keypad wasn't aligned correctly causing it to disconnect from the keypad every so often. This too I had to fix by sticking some paper underneath where the connector sits. It worked after the modifications but the end result is the keypad was raised causing issues where pushing the up key would force it to push the left key too. Unfortunately after awhile the screen stopped working likely due to the fact the different layers were separating. I gave in and bought a new screen from an online dealer elsewhere just to get scammed in the end with a broken LCD screen which they refused to replace claiming I cracked it. So now I've purchased a new screen of eBay yet this one has issues too, it's thinner than the first one I got, but has the same problem where the ribbon doesn't appear to be aligned correctly either. This time however, I get some ugly dead pixels in the lower left corner of the screen and the rest is completely jumbled with white lines going through it. I've already contacted the seller for an exchange and am about to lose all hope getting this phone working. Anyway, back to the topic. Do the screens in the G705 vary from region to region or between versions? When I got it I found the phone was from Hong Kong (firmware was HK anyway.) though the manual and included paperwork suggested it was from France. The screens I have purchased seemed to have varying differences between either the thickness is too wide, the ribbon doesn't fit the correct position, or some other incompatibility. I bought this phone.
Please help someone I have encountered my first Elm problem. Over night I charged the phone & this morning it's still charging & will not pass 66% charge. I took battery out put back in & charged with the phone off for another hour. When switched back on it was now @ 65% This was after another hour of charging with the phone off. I then did a master reset of all not just settings. Charged it up again for a further hour & still the charge is not increasing. Please help what the hell is going on? This battery has a mind of it's own. I have a feeling something has occured since I kept plugging & unplugging quite often the phone in & out of my pc. So maybe it's caused this I do not know. Please any suggestions this phone has been reliable upto this piont Esato Awards King of Garbage 2009/2010 & Best Debater 2009 x10 & Nokia N8
BATTERY CANNOT BE CHARGE PLEASE USE A SONY ERICSSON BATTERY. after flashing my phone. i got this error, i've tried changing my battery but the error is still there. my phone is K850i
My Sony Vivaz was working properly and then suddendly applications stopped working. Then I noticed the applications I had installed in the memory card are not longer displayed on the screen, and when I try to take a photo it says there is no memory card and that they will be stored in the phone's memory. Additionally, when I try to reinstall the applications I always get the message File error. What is happening to my phone? How can I fix all these problems?
I bought a new sony spiro this weekend and so far has been a pain in the back. It resets when I try to access the camera, sometines it stops playing music at random times, or it simply stops reading my micro sd. Today I installed the newest firmware, but still the same problem continues.
I am having trouble with the GPS on my vivaz.The problem is that it seems to be having trouble finding the satellites and at best only picks up one, giving me a message that says "GPS works poorly indoors and in enclosed areas".I have had the phone for about two months now and it did work perfectly at first, I have fitted a zagg invisible skin to the phone and cannot recall if I had used the GPS with it fitted but have tried with the back cover removed and the invisible skin peeled back where the GPS sensor is located but to no avail. Can anyone help or is it a warrenty issue?
Accuracy of the gps on my elm. from wisepilot, chose options-settings-gps but it always says no gps coverage. i have another gps equipped phone and it is able to detect 7 gps satellites from the same location. has anybody experienced problems with the elm's gps and how did you fix it?
I got my satio in may and didnt even have it for a month before things went wrong. firstly, i was never able to send a MMS to a virgin mobile phone. and then i wasnt able to send a text message to anyone. i called SE and they did all this stuff and called my carrier AT&T and nothing was wrong with my service because i put my SIM in my old phone and was able to send MMS and SMS. so SE said i had to send my satio in for repair(why they didnt just replace the phone i have no idea) and now i am waiting for parts. its been 2 weeks since i sent my phone in. and now i hear there isnt going to be another update? theres slight problems with this phone that if were fixed, it would beat the iphone and droid by a mile. i was just getting used to my satio and then i had to return it. they say i probably wont get it back until the 8th of july. thats just crazy in my opinion. why didnt they just replace the phone? when i looked into the satio as my new phone it looked so cool and when i got it i was so amazed by it. i even got a manuel in a different language, had to call SE and they said they wont send me an english manuel and that i should just look it up on their website since they update the software a lot...well apparently they dont since they havent updated it in months. to say the least, i am disapointed in SE with their future of the satio.
I can't decide should I buy Elm or Hazel? I heard about all those firmware update and thats new to me, because I never did anything like that to my old K750i. Is it neccessary to update to the latest firmware? I've also heard that Hazel has a lot of bugs. Is that truth? And recharge problems, are they that bad as they say? I've recharged my K750i for about every 2 weeks.
In a usage time of this phone I had a problem with function Wi-fi. At connection to ad-hoc networks the exchange of packages does not occur. What should I do? I tried to adjust ip-addresses and a network mask manually, to change cryptography techniques, but it hasn't helped.
im not able to send any texts from my vivazpro. it remains in my outbox. i checked with the network people. they said its nothing to do with my sim service.
I bought my cell in June 2009, it works perfectly fine. I used to use wi-fi nearly 5 times in a day (my house has wi-fi) And suddenly about a month back, my wi-fi has stopped working. I mean, it doesn't detect any available networks at all. Earlier it used to automatically detect my home network, but now even if I try to search available networks it shows a blank list - I have even tried searching in places like airports, hotels, etc. as Wi-Fi was one of the main reasons I bought this phone for. I'm having a hard time without it.
our universiry has an open wireless network. for using the internet we have to connect to a VPN with a dialer-VPN. with my elm i can access the wireless with Wi-Fi but how can i set up my VPN username and paaword to use internet? i create an internet connection in my phone and set the username , password and set the APN to the IP address that dialer-VPN connect to. But it didnot work. is there another way to set up a VPN wser , pass and ip?