The battery cover is pretty hard to get open I find. Anyways i was using my thumbnail to open the battery cover and as it slipped open my thumb slipped with it as well. There is a little piece of metal that sits right above the micro sd card. It is long and skinny and can be resting upwards a bit.
Nokia 1661: Simple question. The users guide says simply to slide the battery cover down. It doesn't say HOW to slide the battery cover down. It does'nt slide.
The back cover of the Droid 4 can fool you -- it looks like a typical slide-down-with-pressure-to-remove cover. But there's a trick. There's a small pinhole on the black panel at the top rear, where the camera lens and flash are located, just to the right of "HD 1080P." That's the lock. If you insert a pin or other small object into that hole, it releases the back cover and it slides right off.
How do you replace the top cover on the blackberry bold 9700 without removing the entire casing? I've found utube vids on removing the bottom cover but not for the top.
How do you properly remove the battery cover on the XPRT? Do you lift the little slot on the bottom next to the mic or what? Nothing really seems to slide out..
Lately I've noticed that I've been missing a lot of calls and texts, which I finally realized was from the phone not producing sounds. The only way I can get the speaker to work is to either remove the battery cover, or to apply pressure to the bottom of the cover while it is on (or pressing on the speaker grille) so I'm assuming it's some sort of physical connection issue. I don't understand why it would work with the battery cover off though if that was the case, so would a new battery cover fix everything? Or am I stuck with a vibrate-only phone until my next upgrade?
i am basically getting with 3g settings on email updates every 1 hour 15-25 web pages and 10 Internet songs and a couple calls adding < 5 minutes .thats about the extent to which teh battery lasts for me. i end up having to charge at night definetly but sometimes even during mid day.
I recently bought this generic phone pouch with a belt clip and every once in a while the battery and phone will be completely dead. The pouch covers the phone entirely except for the top which is open and I can slide the phone into the pouch from the top. I am sure that the pouch does not have a magnet ie the phone is not coming out of sleep while in the pouch. Even in Airplane mode and all wireless devices turned off the phone dies. I cannot understand and believe this. The pouch is relatively tight and the only thing I can think of is that somehow the side camera button and/or rocker volume switch combination is being "pressed" while in the pouch and causes the phone to turn on and die.
If the phone battery doesn't die the battery is down by 40% with no use at all during the day ie I always use the phone in Airplane mode while at work. I do not answer the phone while working.What could be causing this? I can just go buy a new pouch but this totally does not make any sense to me.
I know there is another thread about the Telus update that came out a few days ago, but that thread is more about issues installing the update.Like most of you, i looked for new features and have not really found any, but figure there must be some improvements in 32MB of fixes.One thing I have noticed is much better battery life. After 3 days, I have noticed that I have significantly more battery when I get home at night with my normal usage.I am wondering if anyone else has experienced the same. Normally by the time I would get home, my phone would report under 15% or less. However I do have a Seidio extended battery (yeah the big honking one). The last few days I have had 40-50% battery left.
Since the milestone/droid has never recognized the extended battery's extra capacity, it reports battery % based on the standard battery size. So even though my battery would report 5%, I could run for 10-15 hours at 5%.So, is the battery life better with the update, or is the milestone now recognizing the extra capacity of the battery and just reporting it correctly.
i had the problem stated above- After changing the handset for the 3rd time, i finally (thank God) have a stable phone. Wish the rest of you luck!If you have a similar issue PUSH TO CHANGE THE HANDSET - it is not normal behavior
I own a French Retail A953 Milestone 2 and I'm looking forward to android 2.3 update. So, after followed the thread [URL]and it's on ! The update is here.Unfortunately when trying to update my mobile using MSU the answer is "no new update availlable yet for your mobile"...I'm using A953 with Android 2.2.2 and the system version is Version.62.4.24.A953.Retail.en.FR.
I recently purchased the Droid Bionic approximately 2 weeks ago. I got one for my husband also. Recently, my phone has been randomly shutting off and the only way to turn it back on is to remove the battery. It has also happened when the phone is on and I am charging it. My husband's phone has not randomly shut off at any time. I have downloaded a few apps which include Accuweather, Go SMS pro and PicSpeed Wallpaper. I also inserted my micro SD card from my old phone into the new phone which I just removed to see if the phone will randomly shut down. I also do not have the pocket detector on.
is there anything i can do to improve flash video playback? after the 2.2 update i was excited to be able to use flash on my phone, but video playback on it seems so bad that it's unwatchable.it's like a slideshow at best, and at worse i'm only getting one frame every thirty seconds or so. oddly enough the sound never skips or stutters at all.i've tried it over wifi and 3g. Internet videos in the native app and other non-flash streaming media seem to work perfectly.i'm using the stock browser with flash player 10.2.157.51 (the latest one available in the android market), and i've tried several different videos linked from m.flash.com
I updated my Milestone which is UAE version to Froyo yesterday after a long delay, was really excited all evening until i discovered two problems with my wifi.The Device does not connect to the corporate network as my office uses 802.1x EAP and there is no place to enter proxy where as my friends using samsung galaxy s (Froyo 2.2) connect to the network and browse using the wifi advanced settings to enter the proxy in their device.
I have a problem in my milestone. Im trying to update my milestone to froyo from eclair 2.1 update 1 via MSU (Motorola Software Update). But after some minute It restart with a blank screen then reboot to OS and MSU says update failed. My last resort is to flash it via RSDLITE but when im trying to get into bootloader it shows blank screen then reboot to OS. I cant enter to my bootloader.
Have a brand new install of Windows 7 64bit and a 6 month old Milestone 2 which has always succesfully connected to PC/Mac in USB mass storage mode, but when trying to connect to new Windows & PC the PC tries to install MTP drivers that fail.Solution is to select the failed device in device manager and manually install the driver selecting the device as a USB mass storage device and not the default MTP device.
After spending 2 hours on the forums and 2 hrs on motorola website, downloading the motorola software update and finding that the updater says that your phone is up to date with 2.1 (where as the motorola site says 2.2 is now available) and browsing thru unending discussions, I was unable to update my Motorola milestone to Android 2.2. I last week sent my phone to the service center to ask them to update it to 2.2, they returned the phone saying it is up to date.I am sick of removing applications and always worrying about the remaining ROM availability. [code]
If the official version is not available in Dubai can someone tell me of a shop where I can get it updated, as I dont really understand the concept of rooting and stuff like that.
Is there some trick to getting the battery cover off, I followed the manual but it wont budge this is the first time I have tried to remove it and I didn't want to break something. My screen and all keys are frozen while trying to download the latest 6.0 software update. Not having a good day.....
I noticed today as I took off the back cover that the battery area is very loose and if I just turn it over, the battery would fall out. Anyone else have this problem?
I noticed today as I took off the back cover that the battery area is very loose and if I just turn it over, the battery would fall out. Anyone else have this problem?