IPhone :: Unable To Connect To AT&T UVerse Router With An 4s And IPod?
May 21, 2012
I am unable to connect to AT&T UVerse router with an IPhone and IPod.I have an IPad that is connected just fine.On the IPhone & IPod I notice that in the Network Settings for WIFI these fields are not populated: IP Address, Subnet Mask, Router. The DNS & Search Domains are.All fields are populated on the IPad.How can I populate those fields myself.Of is they supposed to be automatically populated through my wireless connection?I asked AT&T but they could not help.
My iPhone 4 always looses wifi connectivity to my Wifi router and doesn't want to connect again. After turning the phone off and on again, wifi in the settings is now greyed out and unusable.
i am not able to connect my belkin router using WI-Fi.i have tried the network reset and the phone reset but still same issue. I am able to connect my Dell Laptop and also my HTC One X but not IPHONE.
i have a problem with connecting to the router. it says my router is secured so is my BB and available and i need to KEY IN A PIN TO THE ROUTER so i can connect to it or i can use the push button which everytime after scanning for 3 mins it tells me that it failed so i should go back and try again. im sure ppl out there have/had the same problem as me but how did u guys solve it??? is there anyway that i dont key in the pin in my router???
I bought a xperia ray 3 month ago.its Android was GB.When I connectd it to a TPlink modem router wireless it worked very well. Now recently I bought a D-link router with a dsl modem.but when I connect my phone to it use Wifi It didnt work well.I mean it couldnt open sites well and was able to open just some sites with very low speed.I read that with upgrading to ICS its problem will solve.so I did that last night.but problem not solved completely.my phone cannot open all sites, i think it open just local sites.example it cannot anything I have a laptop too.that connet to router with any problem.
My iPhone 4 (version 5.1.1) uses 3G unless I'm right on top of the router in my home. I've already exceeded my monthly data allowance because of this. My phone company was less than helpful. None of my other wireless devices (kindle fire, iPad, iPhone 3GS, laptop) has this problem.
My iphone 4s is having problem connecting to my home router. (ASUS)I was able to connect my home router using my laptop, and my Iphone can see all the nnetwork in the building, but it just did not connet.I am at work and my iphone is able to connect to work wireless. What can be wrong?
i have an iphone 4s and i can not connect to any wirless router using wifi, the only way it to put it in the freezer for a few minutes and the i only get like 5 minutes of wifi time and the the connection drops again and the phone can not even recognize the network?
I cannot get the sensor to conenct to my iphone? I even bought a new sensor and am getting the same result. My girl friends sensor does connect to mine, but hers is not always available, what do I do?
I have my cell service through T-Mobile and recently upgraded to a Bold 9700 with internet service. I can browse the internet over the 3G network and at a Hot Spot location using the Wi-Fi. What I can't do is access the internet through my wireless router at home. The Netgear router (WPN824 v3) works fine through the cable modem for laptops and my daughter's Motorola Click smartphone. When I turn off the 3G network, I get a "can't find the server message".
Yesterday when i bought the phone at the mall I was able to briefly connect to a wifi spot using nokia 5530 .But when I got home I couldnt connect to my router which also has wireless capabilities , now when I search for network throught the phone I cant see my router ! Im beggining to think this is because I use PPPOE that I also connect my pc to internet ? what should I do to get wireless to my phone too I dont see an option on the phone that asks for PPPOE username and password ,how do I get this ressolved ?
Just received my Curve today. Not sure if this is to do with my service provider or the handset itself! I am also a bit of a techno-phobe!I cannot connect to the internet! On my old LG Ku990 i could easily connect to the web with no need to set anything up and got charged per data received (this actually was included in my free calls). I had such high hopes for the curve to be better than that! I do not know how to set up my curve to be able to acces the web. on the set up menu all the options i have are for a wi-fi connection to my home braodband wireless router. Why can't i just connect via the phone as i could on my old LG? When i try and connect to my home broadband it asks for a PSK code and i do not know what this is or where to find it!Is it possible to connect to the web without using my home broadband router?Any help will be much appreciated as i am dying to use this new phone to the best of its ability!
My children are unable to connect their Blackberrys to the home network with this new router(Thomson Techni-color 582?). With the previous router (585?) all they had to do was scan for available networks and then when ours appeared they put in the password.But with this one when you scan and find the network and try to connect you get the message "this wireless router supports wi-fi protected setup. To connect using a PIN (which your Blackberry will generate), click Next". Then when you click Next you get an 8 number code. it doesn't give you the opportunity to put in the network password.Please tell me how to connect the Blackberrys to our network.
My internet contract with Comcast is over, and I have a BB9550 with Verizon with unlimited data access.I'm wondering can I use BB9550 as a regular modem and connect it a wireless router, then connect my laptop to the router?
I have Blackberry curve 9380. Recently I purchased Digisol Broadband router model DG-BG4011N which I am using with BSNL Broadband connection. The trouble is I cant use this wifi connection on my Blackberry. My blackberry discovers this connection, asks for a passpharase and connects to wifi. It even displays on homesvreen as connected but stil I cannot use internet over wifi. Everytime when I access browser, App world etc, the connection being used is my mobile EDGE connection. When I try to use only wifi by disconnecting from Bsnl network, it will give me error. I contacted Digisol helpline, but they also could not help. I have tried changing security on my digisol interface from WPA only to WPA2 and to auto mode, but still cannot use internet over wifi on my Blackberry. Wifi works fine on my laptop. Also my blacberry works fine over wifi at a friends place.
i just got the play today, and tried linking it to my home wifi and it connects but say limited connectivity. how can i fix this? I have already reset the router,emoved and readded the router to the phone. phone is fully up to date.
AT&T U-verse just replaced my wireless gateway, and I can't get my Droid 2 to connect to it no matter what. I've tried entering the 10-digit network key (WPA/WPA2 PSK) many times, and I just get Scanning... then Connecting... then Disconnected. I've deleted the old "remembered" network and started from scratch, but it won't connect. My other wireless devices can connect to it fine.
I can't seem to get my iPhone 4s to exchange cookies with my Netgear CG3000D router/modem combo? My WiFi signal umbrella icon on the upper left corner keeps floating up and down and left and right. Every time I switch to a different page the connecting issue seems to repeat itself. How do I connect on a secure signal so my iPhone can function properly?
I am unable to use my Iphone 3GS as an Ipod, my Iphone is stuck on activating your iphone, I am using an activated AT&T sim card. how I cn bypass the activation screen to use my iphone as an Ipod.
I want to know if this is a problem with my phone or if it is the router.
The problem is that whenever I try to connect to a router, I get a message that my phone cant authenticate with it. I am sure the password is typed in correctly and I have tried to restart the router and do a factory reset on my phone. The only way to connect to some routers is to push the wps-button. This is very annoying. When at work, I can connect fine to one of the routers there, but not the others. I cant connect to the router in my home without pressing the wps-button (once that is done, it connects automatically)
Is this a known issue with the xperia phones? And is this a problem that is caused by the phones or is it that the routers may be a little old? I also want to add that my other devices has connected to these networks just fine.
