I've got a JB iP4 and have been using wi-fi sync largely without issue. Today I did a sync via wi-fi sync and then added a few new podcasts. I exited out of iTunes10 and when I went back in, I got the following error message:
<<iTunes cannot read the contents of the iPhone "Jack's iPhone". Go to the Summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings.>>
Any idea what's going on? This now happens every time the phone is connected, whether by USB or wifi Sync. The only tab that appears is the Summary tab and the only option it gives me is to restore. It still lists my software version, serial number, IMEI, phone #, etc. but the capacity is now listed as "n/a" and the Name is now listed as "iPhone"
Obviously I'd prefer to avoid having to restore & rejailbreak so I welcome any other suggestions if you've got'em.
I bought my husband an iPhone 3G second hand which arrived today. There was loads of rubbish on the phone from the pre us owner which would have taken hours to clear so I did the erase options under the settings. The phone now seems completely locked. We have tried doing a restore but it simply does not work. When we try to connect the IPhone to the pc the phone just constantly beeps or vibrates and iTunes will not recognise the device at all. We can't seem to get passed this point. We know iTunes and the USB cable are fine as my iphone connects with no problem.
How do I restore my iphone to factory defaults. It keeps switching off during itunes sync. Especially while updating apps. I know the apps are out of sync now. All the ones on my computer are up to date, and some of them on my phone crash the iphone when I try to run them. So maybe this is a mismatch of apps problem.?
if I restore factory setting to my iPhone, is it still possible to restore the backup from itune/ icloud to get the purchased apps and other informations?
How can i see if my pictures are being sync to itunes when i just did is copy to itunes and not plugged my iphone to computer? is there a possibility that it will still sync? even if i don't plug my iphone to computer?
i restored my iphone4 to factory settings because it was running slow and some apps werent working. My phone is now stuck in repair mode and is continually rebooting itself. I know the usual solution would be to restore via itunes but itunes will not allow me to do anything as i get the error "itunes cannot find disk"
iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I've been getting this message while I tried to restore my phone. How can I be done with that?
My iphone dropped out of my pocket onto a carpeted wood deck floor while sitting in a lawn chair (approximately 15-18 inches). When I went to use it next, it wouldn't turn on. I tried a reset (home button and power button) and got a message to plug it into itunes for a restore.I've tried restoring it probably 25 times. I've made sure all software is up to date on my computer. I've restarted my computer about 10 times. When I try to restore it goes through all the motions and looks like it's going to work but ultimately I get an error message(I've had several different errors: 21, 2006 2001) from itunes that says it could not restore it. The only thing that shows up on my iphone screen is a graphic of a USB cord connecting to itunes.
I´m trying to restore my iPhone 4S 5.1, using iTunes, but I´m not sure if this method will upgrade to 5.1,1 I do not want to upgrade from 5.1 to 5.1.1, anyone knows if can i restore it with out upgrade?
i have used iTunes to restore my iPhone to factory settings as a new iPhone, no backup involved. So, i have plugged in my iPhone to the laptop, i have used the RESTORE button in iTunes and the process started smooth. At the end, the iTunes told me that my iPhone will restart, and it did. After the restart, of course, the configuration of my iPhone was needed. iTunes told me not to unplug my iPhone and to wait until the restart its over. And i did. When iTunes was reconnecting my device, it told me that my SIM has a PIN CODE and i need to enter it so i can proceed with configuration. So i did this step also, i have used my PIN on the device, on my iPHONE the configuration STARTED but iTunes told me that it cannot reconnect with my iPhone and that i should retry later. So i didnt used iTunes to configure, instead i did the configuration directly from the phone.
1. Why didnt iTunes reconnect with my iPhone after i entered PIN?
2. Does it matter if it didnt reconnect, so this way i was forced to do the configuration directly from my iPhone and not in iTunes like it supposed to be done after a restore made in iTunes?
3. What does EXACTLY restore from iTunes do !? And what does this mean, from the HELP iTunes files (red lines). What does it mean by "doesn't erase it?" Update and restore software on iPod, iPhone, or iPadUsing iTunes, you can update software on your iPod, or update iOS software on iPod touch, iPhone, or iPad.If you are having problems with your device, you can also use iTunes to reinstall the software and restore your device's default settings.Important: Restoring iOS software on iPod touch, iPhone, or iPad deletes your information, but doesn't erase it. Deleted information can't be accessed through the device's controls, but it remains on your device. To find out more about erasing all content and settings (if, for example, you plan to give your iPhone away), see this article at the Apple Support website.
ShowTo update your software:HideTo restore the software on your iPod , iPhone, or iPad:Connect your iPod, iPhone, or iPad to your computer.When your device appears in the iTunes window (below Devices), select it.Click the Summary button, click Restore, and follow the onscreen instructions.If you're restoring software on your iPod touch, iPhone, or iPad, iTunes backs up your device at the start of the process. You can restore your settings from the backup at the end of the restore.
4. Why now, when my iPhone is factory settings with nothing on it, after pluggin to iTunes, my used memory went from 26x MB to 392 MB used?
So used the find my my iPhone app on my ipad to erase the data on my iPhone 4s. so my phone showed the apple logo then a loading bar. When it was complete it showed a loading circle, kinda like the buffering thing on YouTube. And now it's stuck in a loop. I can restart my phone and the data is not erased but after 30 secs it does the loading thing again and stays in a loop. But then I put it in Dfu mode and tried to restore it but iTunes says I don't have permission to download the 7.1.2 firmware.
i have some conection call problems and the network company tels me to make softwere to my phone so i have i backup and i make restore for all in my iphone after
i tried to restore my back up it goes will to the end tell less than 1 menites it stop and i have a wrong message that the backup may damage or my iphone is not support
i lose every thing all my contacts , message , everything
itunes keeps asking me to restore my iPhone and I don't want to lose any of my applications or data, is there anything that can be done. I Try Using I Tools. But I Can't Import Or Export
Plugged my iPhone into the iMac today, and it wont bring up or connect to iTunes. This hasnt happened before. On my PC, same thing happened. Anyone have any ideas?
Update: Friday, Jan 22: I went into Time Machine and restored my machine a few days back, and presto....the computer now sees my iPhone and everything works fine. I still dont know what happened to cause the problem, and that bothers me.
Last week I purchased three ringtones from iTunes directly from my iPhone and when I synced up my iPhone to my Mac just now, it removed those ringtones off my phone but now I can't figure out how to get them back on! I can see those ringtones in iTunes on my Mac but when I tell it to sync those ringtones back to my phone they never show up. What am I doing wrong?
There is this 2G iPhone that is (almost?) bricked.
As far as I know, the phone did work until recently, was not dropped, but suddenly got stuck at this screen:
The owner is not computer savvy, and is unsure whether the firmware has been updated (by chance or not).
Right now the phone is stuck at the "Restore needed" screen. What have I done so far: Put it in DFU, iTunes finds is, and tells me it needs to be restored; I have downloaded the 1.1.4, 2.2, and 3.1.2 firmwares for the 2G; I have tried to SHIFT+RESTORE many times, and every single time it ends up giving me error 23.
I tried all of the above-mentioned firmwares, have tried with iTunes 9.0.3, 8.2 and 7.5 MANY times - with the same result: Error 23.
There is something interesting: when I tap the "i" on the screen, it shows a windows that says: IMEI: Unknown, and ICCID: Unknown
I have searched online for a whole day now, and people say that this is related to a hardware problem with the modem; others said that it could be fixed by flashing w/ older firmware and older iTunes version - both of which I have tried.
So bottom line is that after all I have tried I am still nowhere. And ideas what else I could try?
i have updated my iphone 4, suddenly it appear in the itune and it say orrcured 21. after that my iphone4 black out, then appear only itunes.how can i restore bsck my iphone.
How do I reset and restore from ITunes.I have a IPhone 4s,and I can't reset from the phone because evidentally my 4 yr. old son set a password for restrictions.
The lock code on my iphone was entered incorrectly several times and the iphone wiped itself. ( I dont know what genius thought this feature up?).That was bad enough as I was overseas at the time and use the iphone for business. I've just tried to restore using itunes from a backup I took before heading overseas and this completed but failed to restore anything useful. Contacts are gone as are photos , notes etc . Now the old backup appears to be overwrittenm as well. Pretty close to throwing the iphone in the bin and getting a different phone. Anyone know how to restore from a backup taken on a particular date?
today i upgrade my iphone4 to 5.01 ,when use itunes to restore 4.3.2 backup .the itunes compain
'May 19 10:33:32 BigBears-iPhone BackupAgent2[202] <Warning>: ERROR: Restore error - File path in set of paths not to back up: AppDomain-com.moji.MojiWeather:Library/SyncedPreferences (MBErrorDomain/205)
why, the 4.3.2 backup is full and succeed . what a suck of itunes.
