This is an iPhone 4S. I have stupidly inflicted this on myself. Here is the situation: I haven't synced my iPhone for several weeks. I tried to install the latest version of iOS via wifi which I have done many times before with no problem. This time I ended up with the phone stuck in recovery mode. If I connect via cable to iTunes, it tells me that I will need to use recovery and restore. I would very much like to attempt to save photos and contact updates done since the last restore.¬
Hey just tried to upgrade, it wiped my phone and went to update, however update failed and the phone is stuck in recovery mode and i tried to re do the update as itunes says but i get the same error so now i have no phone. whats the fix for this ?
When loading iTunes this morning an update that I had been putting off popped up and I figured since I was going to be in the house for a while I'd finally do it. An error took place that I foolishly ignored and made no note of.
My iPhone is now stuck in Recovery mode (I assume so anyway, after having googles my problem for hours), iTunes tells me I need to restore the phone and so I click to allow it to. It then gets to the "Preparing iPhone for restore" and just sits there, doing nothing.
After my daughter dropped my phone on the floor (surprisingly the screen didn't crack), the screen went black and I could not turn the phone back on. This was not the first time that this happened to me and I fixed it by plugging it in to my car charger. I tried that this time and it did come back on but the place where my signal strength bars should be said 'searching'. After a short while, a message came up saying that my phone needed to be restored and to connect it to iTunes.
My phone would not come on unless it was plugged into a charger, other than that the screen was black (and still does that). The apple screen will show and then the usb cord connecting to iTunes symbol comes up and it will go passed that screen.
I connected to iTunes, and found out that my phone was in recovery mode and needed to be restored. I tried to restore several times and the same thing happens. iTunes will begin the process (extracting files first) after that part is complete and iTunes starts the next step of preparing the phone for restoring, my phone will go black as if it shut off and then the apple screen comes on and then the usb cord connecting to iTunes shows up and then iTunes delivers the error21 code. I've tried pressing the home button and lock button at the same time for seconds and then holding the home button blah blah but it does me no good because I can't get my phone to do anything unless its connected to a charger or the computer.
My phone has been stuck for two weeks. I am not covered by Apple therefore they won't do anything, but sell me a brand new phone. If I could afford one, I would bypass them and just upgrade. Unfortunately, I am not capable at this time. I have tried everything provided by the "help" on iTunes. I get ERROR CODE: 21 every time it goes to try to recover. I tried doing everything it said to help fix this error, but nothing works.
Well my phone is stuck on recovery mode and I tried restoring it but it keep on ending up with error 1611. I tried everything I could online I search everything and tried almost everything none turned out to work . I have a iphone 4gs on ios5.
my iphone 4s had an update under settings so i did and now its stuck in recovery mode. In itunes it says i have to restore, but will i get back all of my contacts,pics,apps,etc? will it give the option to get them back?
My iphone 4 is stuck in recovery mode. I was trying to update via iTunes and when I came back the iphone had the picture of the iTunes logo and the cable and the computer stated iphone stuck in recovery mode must restore.¬ I don't want to restore as I will lose everything.¬ Everywhere I read it says you have to power off then hold this button etc etc.the problem is I cant power off to do this?
So my problem started yesterday when my phone got wet, not fell on water but water fell on it. I opened it up and dried it up, but when i connected it it wouldnt turn back on. So this morning i tried turning it on and it did.So my problem is that the phone is stuck in recovery mode, before that it just got stuck in the apple logo till i tried restoring it.
Itunes gives me error 6 and sometimes 13.i dont care what i have to do i just want my phone to work, i have att so i dont care about the baseband.
I've got a 3GS which was 3.1.3. I had to restore because a few apps wouldnt load properly. When I restore and it finishes it comes up with the itunes & cable screen and iTunes says its in recovery mode (error 1015) and i must restore it - again.I've tried a couple of things including irecovery but my PC is a win7 64bit system and it kind of killed off all my USB ports. I've tried on a Vista Machine and also tried on iTunes 9.1 and the new Beta.
Will Apple sort it out? Will they send it off or replace it if they cant get it working again? It's only got a few days left on the warranty
I have a 3GS running 3.1.2 and BB 05.11.07. I believe my phone is stuck in recovery mode. It's black and has the Apple logo on it. Is there a way I can fix this issue without restoring the phone? I don't want to install 3.1.3
I got my iphone 4 updated to ios 5 months ago and it was successful. However, i was updating my software to ios 5.1 using the phone itself and it went into recovery mode after that. The moment before updating it was fine and now it stuck in recovery mode, showing the itunes logo and usb cable.
I connected my phone to the itunes on my laptop and it shows that my iphone is in recovery mode and must be restored. I've tried restoring it but after the restoration cycle was done, it pop up a window saying there's an error (1) occuring and my iphone was unable to be restored.
Info:iPhone 4, iOS 5.1, update and recovery failed
Yesterday my sister told me she had a problem with her iPhone.She was on 5.1.0 and updated OTA to 5.1.1. When the update was done, her iPhone rebooted and displayed the 'connect to iTunes' screen. She gives it to me, I do what I can and after several restores the only thing that shows up after a restore is the 'connect to iTunes' screen. In iTunes, it says it's in recovery mode and needs restoring....again.
I started to upgrade my ios today. Next time I pulled my phone out it wouldn't respond. After holding the home screen the connect to iTunes image popped up and wouldn't go away. When I got home and connected, I was told to restore. I did so, and after the thirty-minute software update, it was now returned to the connect to iTunes screen and is giving me the same message upon connecting to iTunes.
My iPhone 4 got wet and when plugged in it displays plug into itunes but when I do it doesn't recognize it. The computer aknowleges that I plug it in because it installed the driver but itunes and tinyumbrella do not so I can't get it out of recovery mode with either nor with the button combo. Any idea why it won't work or have a way to fix it?
Now my phone is stuck in recovery mode after an update. I get unknown error 1403 after itunes tries to restore the phone for more than 10 minutes. Any way to fix? The help article for error 1403 just tells me to connect to itunes. Connecting to itunes tells me to restore, when I hit the restore button, it updates for a loooooong time then says "unable to restore, unknown error (1403).
This morning I connected my iPhone 3GS to my computer and itunes told me it couldn't recognize my phone and needed to restore. This had never happened before but I clicked restore anyways but recieved an error message. After about an hour of trial and error going through Apple's diagnostics I fixed the problem by enabling Itunes in Norton Security, which had just updated recently so I thought that was the issue. Itunes began letting me begin the restore process (without showing an error/failure message) but simply freezes every time halfway through the update. Each time the bar at the top will will up about halfway and then stop forever. If anyone can help me with this issue I would really appreciate it! Obviously I use my phone everyday and it is completely unusable in it's current state.
I recently purchased an iPhone 4s and I set it up via iCloud and it worked later when I arrived home after going with my dad for a party my iPhone would not start it was in recovery mode so I tried putting it in iTunes and starting restoring it then after it was 75% done it rebooted and iTunes says "the iPhone 'iPhone' could not be restored an unknown error occurred (1) so I tried again but still no luck and I also tried putting it in dfu mode but still no luck. I don't think it has been jail broken because I don't know anything about jail breaking .
I recently lost my phone, so I used the find my Iphone app on icloud. I had locked my phone from there. Once I found my phone I unlocked it with my password then it immediatly went to the recovery screen where it tells you to plug into itunes. I thought that it was just because of the find my iphone app. But I have tried recovering it more than 10 times. I updated my itunes restarted my computer changed USB hubs and tried DFU mode. Nothing will work! I can get it to open up my actual phone but when it is in this mode the home button does not work, and if I hook it up to my computer it goes back to the recovery screen. I really need to fix this and would prefer that it didn't cost me any money.
So basically i was on iOS 7.0.0 and when my phone was below 10% and i tried to charge it, it would keep turning on and off every 2 minutes. Somebody had told me to update to the latest version of iOS, so I did. While downloading the new version onto my phone an error code popped up (error 29) and the update bar was only half full. Ever since then my phone¬ has been stuck in Recovery Mode.
While updating to iOS 4 it just errored out with error 14. iTunes said I had to restore before moving on. So I did, when progress bar starts when updating iphone software it errors out all time on error 14. Tried all the solutions under Apple support different USB port, restarting computer, different 32 pin cable,different computer. Nothing works errors out on same error.
Looking into the debug log i do notice why it always crashes always see this come up: decompressData failed with error 1000. I dunno but I am starting to lean towards a hardware failure.