I updated to 2.1 a while ago, but today I plugged it up to the computer and it said there was an update available. So I updated, and now my phone will not turn on. When I press the power button, the light just flashes red 3 times. I can do anything with it on the computer, becuase the computer won't recognize it while it's off.
View 4 RepliesXPERIA Z5? When i want to make a screenshot by pressing my powerbutton my ringtone goes off and i can't stop it.
View 9 Replies View RelatedHave just updated to lollipop on my Z2. But now the phone's backlight stays on unless I press the power button. Sleep mode is set to 30 seconds.
View 1 Replies View RelatedFirst, my xperia x10i had frequent starts up, minutes after, signal lost. It has a red X mark on the signal status . once you make call its says no signal or insert sim. I did that a lot but nothing happens.So i decided to re installing the 2.1 update using PC companion. It helps,, everything was ok for one day.. After which, it restarts again and again, signal lost and reintall again the 2.1 update.But this time, after i press the power button , the vibration never stops... it never started up.
View 3 Replies View RelatedI'm currently facing this problem and it's really annoying. I never update my phone or whatever because it will slow it down.
My phone went out of battery and it turned off. So i plug the charger in and waited for it to restart. After restarting it, I realize there are several settings that ran away IE: My ringtone preferences and keyboard preferences. So far, I've already readjust it, But ever since the phone restarted like that, I can no longer lock my screen, not even if it times out itself after 15 seconds. and when i press and hold the power off button, instead of showing the menu for options like "Silent phone"/Flight mode"/"Shut down" it only shows power off. What can i do to get the original settings back ?
everytime when you press home button to activate the phone, you need to drag the lock icon at bottom to right hand side in order to operate the phone function, pls advise how to elimenate this process? can just press home button & go straight to choose call phone or write message or music
View 2 Replies View RelatedPhone was working fine, then started to not go to sleep when I pressed the power button. It also frequently posts a message informing me about how to restart the phone using the power and volume buttons. It only goes away if I press the volume up or down.
How to prevent it. I tried a hard reset but have had no success with it.
Lollipop 5.0.1 driven G3 are normal, or if there are fixes I am missing. I did switch over my SD card from my previous phone (Galaxy S4) and some things (music, photos, contacts) seem ok, while others aren't...
1) Cannot seem to update/install Apps - It just sits there acting like it is updating, the status bar scrolls, but nothing gets updated (or installed). As an example, I tried updating Facebook through the Google Play Store - My Apps option, sat for 10 minutes, and it never updated (but it still says I need an update). This is true for a large number of Apps that I have. I tried to install Helium so I could back up before a factory reset, and the same thing happened. It never installed.
2) Network vs. Wifi - At home, I use my Wifi connection, and I noticed that both the Wifi signal indicator and the Network Signal indicator display. I know this did not occur on the S4 (with Android. 4.4.4). Is this normal behavior for Lollipop to display both Wifi and Network connectivity?
3) Can't find a microphone for Speech-to-Text messaging on either the LG or Google keyboards. I saw one article that shows it is in the predictive text field area, but it isn't appearing on mine. - Actually - I just resolved this - it is hidden under the settings icon on the LG keyboard. I had to long press the icon for it to display.
4) No Silent Mode from the Long Press of the Power Button.
I face a problem with my n5 i m on stock android 6 so yesterday suddenly my phone switch off. It took me over 3 h to understand that.when i press the power button to unlock or lock to sleep mode my phone (2 to 3 times ) switching off. I dont consider that a factory reset will be useful because i m running this software over a month without problems.!!!
View 1 Replies View RelatedIphone works so good till it goes to Sleep Mode or till i will press Power button...it just freezing.. black display.. and nothing help.. only Hard reset.. It started after updating to 5.1.1. I` ve tried to update again-doesn`t help.. restart-also doesn`t help..
Info:
iPhone 4, iOS 5.1.1
I got my tablet today and have been enjoying playing with it except for one issue. The power button is very difficult to press and get it to register. I have to press it at just the right angle and in just the right spot in order to get it to turn on or off the screen / tablet. The volume buttons make a slight clicking noise and are much easier to press so I was wondering if the power button should also move easier and make a slight clicking sound or if all the tablets have a power button that's hard to get to register?
View 6 Replies View RelatedSome days after I bought the Xperia X10, I realized I need to hold the power button lont time ti turn the X10 on, is it normal?
Can someone tell me, what is the average time for holding the power button?
im using minimalOs as a rom , no modification everything is stock but keep getting lags and the phone does not respond at all the only way to go is a long press on the power button to reboot. i've been experiencing the same issue with many lollipop roms even the factory one is there any solution or hint to shed some light.
View 7 Replies View RelatedI press the slepp butten and when i tried to use it again it won't turn on.
View 14 Replies View RelatedWhen i press the power Buttom the Screen Backout, but never get locked, even that i use security passowrd, but it never get locked, suddenly this happens, besides having all Contacts un reachable to call, when i receive calls i can see contacts but in phone book Nill (no contacts at all), all of this happened suddenly
View 9 Replies View RelatedI have an htc one max and my power button is broken, it has 0 response or feedback the last few days. at first it was stuck with the power down options continuously popping up, but not its just completely unresponsive, the button itself isnt broken or pushed in but their is just no feedback at all, i had to even get an app so i can unlock and lock my device. and my phone died and i had it on the charger for a few hours and nothing still a black screen..dead. so i connect it to my computer and it just keeps connecting and disconnecting before it can even install the software to recognize it.
View 2 Replies View RelatedI have never had to turn off my phone and I don't know how.
View 5 Replies View RelatedI have a problem with my iPhone it keeps turning off when I'm going to sleep and I woke up, my iPhone can't be turned on by pressing the home or sleep wake button but I can turn it on when putting is on an outlet that can charge my device but it's not low bat or out of battery.
Info:
MacBook Air 11", Mac OS X (10.6.7), iPod touch 3g 8GB, iPad Wifi 32GB
When I plug my Ray into the AC supply and turn it off to charge, sometimes it does charge it up, sometimes it does not.Is there a button to press to charge up the phone?
View 3 Replies View RelatedI haven't seen anyone having this issue out of the numerous ones I've seen on this site. My iPhone 4's screen was sometimes going black. Hitting the home or power button wouldn't turn it back on. I'd have to hold down the home and power buttons to do a hard reboot to get it back up.
I returned my phone yesterday to get replaced because I was also having the No SIM Card Installed error. My new iPhone 4 is having the same black screen issue occasionally, though.
my power button wont turn my iphone 4 on or off.
Info:
iPhone 4, iOS 5.1.1
Yesterday, 9-2-14, my iPhone 4 unexpectedly powered off when it still had 50% charge. The lock/power button has already been broken for about 5 or 6 months and the screen is cracked. It was working for months even after these things had been wrong with it. I don't know how to turn it back on.
Info:
iPhone 4, iOS 7.1.2
I bought an iphone from my friend and she disabled it because she can't remember the password and the power button is broken
Info:
iPhone 5, iOS 7
So, the 6P is a sodding big phone and I have fairly small hands.
Switching on to an unlocked state using the fingerprint reader is easy. Switching off requires the power button, which means wrestling the damn thing into a position where I can press the button.
I've looked at a few apps that switch off the screen with a shake or gesture, but these always result in a pattern request to unlock fully when turning back on with the fingerprint reader. Looking at this thread, it seems the Nova Launcher double-tap off function results in the same secondary security challenge when switching back on.
I assume this is because the third-party double-tap/shake/gesture event is only turning the screen off, not actually locking the device as the power button would.
It appears that the power button on my Galaxy S6 isn't working anymore. I have faulted this with samsung and they have asked me to send it to them for repair. Today, I was going to back up my phone but my battery went flat before I could do this and now I cant get the phone back on!! Some have suggested holding down the volume up button then plugging in the usb lead while connected to a computer, it didn't work. I have also tried the volume down button and the home button at the same time while plugged in via usb, this didn't work either. how I can get into recovery mode without using the power button, I really need to get the phone back on, the battery is sealed in.
View 1 Replies View RelatedThe power on/off button doesn't work. I can't turn the phone off
View 1 Replies View RelatedA lot of times when I pick up my N6 the screen does not turn on so I'm forced to hit the power button. What is the "trick" to get this to work? What do you normally do to turn on your screen besides hitting the power button? Or is that my only option...
View 2 Replies View RelatedI have big problem with my iPhone 2G. My power/sleep button is not working so only way I can turn it on is to plug it to computer or charge it, but today it won't start or do anything.
Info:
iPhone 2G (original), iOS 3.1.3
I've updated to lollipop & new built update & everything works nice.. Love the new update so far.. Battery drains much faster though. Is there any possibility to change google now shortcut of home button long press? Can we set something else to that shortcut?
View 4 Replies View Relatedi have recently brought a sony xperia z3+. Love the phone and everything is fine. Until a day or two ago. Everytime i make a call the screen goes dark. I can't have access to the speaker or mute button or the dial buttons nothing. Until i press the power button which then terminates the call.
View 9 Replies View RelatedHitting the power button does not turn the display on. Actually nothing turns the display on. This began happening occasionally, for a few seconds at a time. Then it became a few minutes at a time. Now it is permanent.
What's truly odd is that the phone seems to be completely working otherwise. It rings, alarms go off, indicator lights flash. It connects to my car over bluetooth and if I plug in headphones and hit the play headphones' action button, music starts. If I hold the power button down, every 5s I get a little haptic feedback, and it appears to reboot if I hold power and volume up (or down, I can't recall), so I know the buttons are working.
I even have a suspicion that touchscreen digitizer is working because I think I've dismissed a few notifications by double-tapping (I'm on Lollipop). Also, I swear I have seen very fleeting, very dim views of the unlock screen a few times.
I should also add that I took advantage of Google's recent replacement policy lenience - this is a refurb I've had for a month or two.
I'm contemplating replacing the screen/digitizer on the theory that this is a broken screen. It feels like the backlight is broken. But I'd rather not spend the $$$ and time if the problem is deeper than that.
