I've been having trouble charging my 9810. When I plug my phone in the charging bolt doesn't show up on the battery, instead I get the usb symbol on the battery. I have to keep unplugging and then plugging my phone and after several tries the bolt shows up and it begins charging my phone.
I bought a Torch 9810 last week and the problem is it is overheating. I charged it for the first time and only started using it once the battery was fully charged. At first everything was normal until I started using it, it started getting warm at the back, the bottom part below the battery. The longer I continued using the hotter it got. Once it is hot hot it stops reading the Sd card, it gives the Fatal error message. The following day I took it back and was swopped with another new phone, same model, and I am still experiencing the same problem. I used the Curve for two years and never experienced any issues.
I cannot get my new torch 9810 to charge with a usb car charger. All the ones I have tried (4 brands) do not work. The phone does not recognize them as a charging source. They will charge my ipad, iphone 4s , curve and torch 9800 but not my 9810. I am reluctant to buy a charger for this phone only. Fustrated again with BB.
opying contacts from a Bold 9810 to another 9810.Using the BB Desktop Software I did a full backup of the device (which contained 400+ contacts), then did a full restore on a new 9810, but only 200 contacts were copied over.Next I tried to do a selective restore, but although the 400+ contacts were in the file, it was grayed out and could not be selected. How can I get all the contacts into the new 9810. (Side note: I was able to restore the 400+ contacts to a BB Bold).
i recently saw on the website my phone can upload os 7.1 so i downloaded it to my pc but when i connect to desktop software and check it says no uploads available. I then tried doing it from the handset via options and again says phone software up to date. I am using os 6 but cant work out why it wont let me update to 7.1
i bought a 9810 and this is what happens: i connect it to the charger, then the red led turns on, eventually it goes off and a little sand watch appears for like 5 seconds, disappears, and the process starts all over again.
I just got a new Blackberry Torch 9810 and it won't let me add contacts. I scan someone's barcode and it says pending on my end but they never receive the request, we tried it the opposite way and it says pending on their phone but I don't receive the request.
I keep getting an "Error 102 Reload Software for furhter information [URL]" message. There is a Reset button below that and when I press it, it just tries to restart my blackberry. It will load to a certain point and then come back to this Error message. I went to the website it suggests and it tells me to go onto my Blackberry Desktop Manager and reload my software. I tried to do this, but my Desktop Manager and my smart phone will not connect and so I can't reload my software.
My BB Torch 9810 is less than 3 months old. Yesterday Morning, I observed that it went off. I thot the battery was down, so I decided to charge it. Then it began the booting and rebooting and has not stopped till now. My BB pin is (personal info removed) perhaps there is something remotely that can be done.
I was so excited to have a Blackberry device and my choice was the Torch 9810 mainly for 3 reasons.
1- The big screen. 2- The touch screen with the sliding keyboard. 3- Latest OS.
As I watched and read so many reviews about it and compared it to the Bold 9900 and the Torch 9860. The reviews for the Torch 9860 were somehow negative, and the sliding keyboard was a win over the Torch 9860. Bold seemed to be a good phone but the bigger screen was again what made me go for the Torch 9810.
For a new Blackberry user like me, I couldn't really figure out much differences between the three phones.
Unfortunately the Torch 9810 is not yet here in Egyptian market and I was about to buy a Bold 9900 till I noticed it would be locked to my carrier and then I changed my mind. I asked a family member to buy the Torch 9810 for me from the UAE and I finally got it one week ago.
i have blackberry torch 9810...my phone is not turning on , i dont known why battery is full only , i have changed battery from other tourch even i changed the battery not turing on? when i turn on torch 9810 the red led light is on for 3-4seconds , then its red led switch off , after that cursor running middle of the screen again and again come like this , but its not turn on? i have backup my blackberry before itself..how to restore the OS or hard rest.
Phantom calls. Rings once or twice, screen doesn't light up, no call on call log. No alerts set up. Tech support says to get an new telaphone number. I've had it for 12 years. That isn't going to happen.
oops my torch 9810 got wet. It seems to be completely dry now. the red marks on the battery and on the device are still there, but it won't power up. What can I try? I've plugged it in to the charger and to the computer--still no luck
My phone keeps freezing up with the system is busy symbol. Its been happening every other time I try to scroll or hit a key. I wait and/or take the battery out tounfreeze it. This makes my phone practically useless.
My brand New Tourch 9810 keeps on freezing up - I have to take the battery out in order to get it working again - I can not get onto Facebook, my BBM's doesnt go through, Sms' doesnt go through and when I tried to make a call it says - Call failed. I can not receive calls either - it goes straight to voicemail.
I can not send pics via BBM either - although it show send on my side - the receiver never gets them.
I really like Blackberry but are so frustrated that I want to get another make of phone!
I have a 9810 from ATT with OS 7.0 , when I tried to update OS to 7.1 using BB Desktop software , there is no 7.1 version available. The only update available is a higher version of 7.0. What should I do to get OS 7.1 ?
yesterday i tried to upgrade my whatsapp and after upgrading i restarted mt phoe ...but after that when it reaches 60-70 % of booting it gets restarted again...
I have recently bought a Torch 2 (9180) phone with OS 7 from a retailer in India. However, I have been facing some problems from day 1 of the purchase. A summary of some problems is as under:
1. On clicking power off icon or pressing power off button, the phone does not shut down completely. It goes in somewhat standby mode and by just pressing the power button again, the phone starts as if only the screen had been turned off, i.e. the processor still keeps on working. Is it normal for OS 7 users because a friend has 9800 with OS 6 and it switches off completely on pressing the power off button and boots again when the power button is kept pressed? Also, if this is true for OS 7, then is battery pull the only way to completely switch off the phone?
2. The screen has stopped rotating automatically without disabling it!
3. The led light (white coloured) keeps on continuously flashing and drains a lot of battery life. I am unable to switch it off.
4. The phone has started hanging/freezing for 10-20 seconds each time I want to use any app.
Once I take 9810 out of case, it takes 5-10 seconds to update current time and display new message if any. It also behaves similarly if it went into sleep mode and I press any button to bring it back to active mode. Sometimes hourglass is displayed and takes a while for this phone to become operational.This was not the case with 9800 or any other blackberries I had in past.Is it normal?
Device info Your carrier: Rogers Mobile Blackberry 9810 (3G/H+, Wi-Fi) OS: 7.1 Bundle 648 (v7.1.0.205, Platform 5.1.0.181)
I upgraded to OS 7.1 last night, and since then my phone will not charge when plugged into the charger that came with the device. The charger from my wife's 9810 or the charger for either of our Playbooks. When plugged in the screen displays "The charging source connected to your BlackBerry device cannot charge your battery" I have completed a battery pull and wait 30 seconds, did not fix anything.
I bought my TORCH 9810 3 months ago, it worked well, but lately I've been experiencing problems with it, the screen doesn touch, when it works, it works very slow, I can tap six times and it won't work, what is the problem and how can I fix this! Everything works very fine, except for the screen, why?!