If you see the screenshot, you will notice that the end marker is not where I finished (green flag).Does this mean it doesn't pick up the last bit of my route? Does this mean it doesn't time it correctly? Does this mean that the map is off but the time and distance are correct?
I am trying to understand how I can do an indoor activity without getting speed and distance data in the results.I have used the Motoactv primarily for outdoor training for hiking, walking, mountain biking, and inline skating. Additionally, I am using for various indoor activities including plyometrics, weightlifting, indoor cycling, and indoor inline speed skating.I have been able to understand the use of GPS for speed and distance calculations (albeit with a number of accuracy impacting calculation concerns as noted in other posts in this forum). What I do not understand is the speed and distance calculations for the indoor activities. Nor do I have any idea on how the accelerometer (or pedometer) capabilities are used in speed and distance in conjunction with GPS for outdoor activities.
Specifically, for indoor activities other than those which are directly correlated to running, walking, cycling, or an elliptical, how are the speed and distance calculated? For example, when I did an hour of weightlifting using that category, the workout results showed that I had travelled over a mile with various speeds. It seems sensible to me that only a few of the indoor workout categories make sense for speed and distance data. I would not expect yoga or weights to track distance. Additionally, in a pretty intense indoor speed skating practice yesterday, I used the Motoactv for the first time to track my HR data. It produced some speed & distance data for the times in which I was skating, but the accuracy was in no way close. I expected no speed & distance data & I would not expect accurate data for inline speed skating (although that would be awesome). how the various indoor activities use the pedometer for speed calculation? Failing that, does anyone know how to stop an indoor activity from tracking speed & distance? Or finally, do any of the indoor activities NOT generate speed & distance?
The Motoactv device has a lot of functionality over & above competitive GPS watches in it being able to intelligently use the GPS or the pedometer for distance calculation for the specific activity. Hopefully, it also has the software logic to NOT calculate speed & distance for certain activities. Recent Garmin devices allowed you to "Use Indoor" if it could not find a GPS signal which turned off all speed/distance calcs. To prevent inaccurate non-sensical data on the Moto, we need to be able to specify activities without speed/distance or be able to turn off GPS & pedometer for specific activities.
Typical cycling computers use the sensors to measure both distance and speed. When an ANT+ speed sensor is used with the MotoACTV, does it get used for distance as well, or just speed? I commute in downtown Chicago and would welcome the more accurate distance measurement in addition to the GPS route tracking.
I have scoured the forums looking for an answer to this question but have not been able to locate one. I have found now, 8 runs in that the distance the MOTOACTV is showing is worsening rather than becoming more accurate. I have seen posts from other stating that they corrected the distance after their workout but I did not see details on how to do e also read to not recalibrate. That the MOTOACTV will become more accurate with time but my experience is that it is worsening. Should I recalilbrate or just manually adjust the distance once I know how to do
Very innacurate readings. See below comparing MOTOACTV with my GARMIN 705and I know the garmin distance to be correct since I know the roads pretty well, and I created the routes using google mapsI expect some type of difference between GPS devices, for example my iphone using wahoo does not always agree witht he garmin, but the difference is less than 1%... with the MOTOACTV the difference is about 10%MOTOACTV (34 mi): https://motoactv.com/workout/show?orkoutActivityId=4QaHxB2cQMeiehkKHkX0MQ%3D%3D&activity=4GARMIN (30 mi): http://connect.garmin.com/activity/167586976MOTOACTV (44mi): https://motoactv.com/workout/showworkoutActivityId=26QvMGqURk6rA1hMEb4w1w%3D%3D&activity=4GARMIN (40 mi): http://connect.garmin.com/activity/167587461MOTOACTV (48mi): https://motoactv.com/workout/showworkoutActivityId=QxSBZlK%2FTr6vP9JT%2BAaNRA%3D%3D&activity=4
I've had issues with the distance being way off while hiking/jogging on trails. While annoying, I decided I could live with it as I really liked the MotoActv as a bike computer.Today, it let me down on the bike. It under reported the distance by almost 3 miles. Looking through the CVS file, I am not sure why this occured. It doesn't look like the GPS dropped out during the ride. The battery in my speed/candance sensor died 21 minutes into my 70 minute ride but I wouldn't expect this to matter for the distance. I also used my Garmin 910XT and it correctly reported the distance. It's frustrating as it has been very accurate on the bike. It had been the one reason I have kept it and not returned it.
On the run viewable on the link below, the workout terminated at the completion of the 'loop', whereas it should have terminated at the start point, this caused the stats to be off by at least a km. Is there a setting to prevent the motoactv from doing this? [URL]
Will the MOTOACTV Golf Edition track shot averages? It appears to only show the shot distance if I am marking shot locations, and then I don't see the information anywhere after (including on the online portal, where it isn't listed on the map with the other information like club selection, which seems odd). I would expect the device to track and store shot distances, and also calculate averages.
Does the calories burned counter on the home page (where the timepiece is located) include the calories you burned during your workouts? I thought it did, but when I check my calories burned before I work out, then after, the math doesn't compute.
know if it's possible to see the entire climb that you've done over the course of a workout? I did a run this morning and all I can see from my stats is a min and max elevation. I ran with a friend who has a Garmin and he has access to this information - I hope it is available and I just haven't spotted it.
On a run today I went down a spiral ramp under a bridge and lost my gps signal several times. I was wearing a footpod. I noticed my pace measurement slowed down from a 6 min mile to about 18 min/mi.
1st question...since I had a paired footpod shouldn't it have taken over to make the pace measurement more accurate in situations exactly like this?
2nd question... assuming the footpod was taking over, how accurate is it since there seems to be no way to calibrate the actual footpod. Is the data from the footpod constantly being taken into account and then integrated back into my final workout stats?
I know that when you press "start" to mark your next shot the distance of the last shot flashes on the screeen.
Is there a way for me to see the distance from the last shot without locking in the position with the "start" button? This is a feature I would use all of the time with my other GPS unit to know how far away I was so I would know approximatly where to start looking for my ball if it wasn't sitting out in the open. Also very useful for letting your playing partners know how far their drives went.
So got my motoactv yesterday and to test I of course started a workout walking around my kitchen..I can't seem to now delete this test workout from the device? Workout->Recent-Run.I was able to remove it from the dashboard but it will not sync the changes to my device as they are still listed.
I have searched extensively but have not found the answer to this so if I missed something i apologize. Can workouts be manually logged on the Motoactv website? The reason I ask is I am concerned about the accuracy of the pedometer so If I choose to do a workout at the gym can I then just manually enter it on the website based on the information from the treadmill.
I tried doing a search on EXPORT. However, I couldn't tell how it brought back results. I bought the MotoActv Golf Edition and am I am web programmer and wanted to see what data I could compile depending on what comes back with the exports. Would be cool to see what is available.
I got my MA yesterday and have had one workout. Whenever I try to sync it, it says Connecting and Starting Sync, but then it says something like Sync Error or Connection Error. I have tried syncing using my home WiFi network (with password), my HTC One X portable hotspot (without password) and USB, but nothing works.
You can delete workouts and have been able to for some time now(at least since January) . Just go to workouts tab. then click on recent workouts. make sure its in bar view not table view. and place your arrow over your workout. A box pops up. In the lower right hand corner you'll see delete click on it nad your workout magically goes away. It still wont fix your workouts if you got carmichealed but you can delete it.
Unless I am missing something, I think the homepage of the MA Portal should show a summary of all of your workouts (split by workout type). So it should show a summary of total miles and calories for bikes rides, total miles and calories for runs, etc.ight now it just shows the summary of your last workout. Is there even a way to get this summary information? When I go to the Workouts tab and go to Recent Workouts, it looks like you can only see 3-4 weeks at a time.
When I set a target of type "distance & time" (e.g 5 km in 25 minutes), I can not see my progress against my virtual opponent, that is, I can not see how far or how fast I am doing against that target. Just appears my data, and none from the opponent. I already have the opponent screen enabled. When I compete against a previously saved workout, it works fine.
can I see my progress against the opponent when I set a "distance & time" target, or it only works when I compete against previously saved workouts?
I had a great workout this morning, but when I was done, the calorie count was at 111. I worked out for 50 minutes and was expecting this to be at least 600.
When I uploaded the data, the calorie count stopped at about 10 minutes into the workout and the distance also stopped incrementing. I had heart rate information, but it was much lower than what I expected (I was working out much harder than the heart rate information shows.).
The image shows the results of the data. what could have caused this malfunction of the device?
I've been using the custom workouts feature on Moto since the weekend. I have noticed that the custom workouts do not show up as the latest workout (my elliptical workout from Sunday is still showing as the latest). My custom workouts are also not showing up in the workout tab, neither in bar view nor table view. The only way I can access custom workouts on the portal is up top on the days of the week in the schedule. Is this a glitch with the new portal that is going to be ironed out?